Brass rupture disc - 400 psi | Cooling Equipment

Product Code	526-400
Description	Brass rupture disc - 400 psi
Unit	Each
Notes	The 526 rupture disk assembly is installed between either a three-way valve or receiver tank and the relief valve to prevent the weeping of refrigerant through the relief valve. The use of the rupture disk must be in accordance with ASME Section VIII, Division 1, UG 127. The rupture disk setting must not exceed the set pressure of the relief valve. When using a rupture disk in combination with a relief valve, the relief valve discharge capacity must be de-rated by 10%. There are two 1/8" NPT connections above the disk. These are used to provide an indication that the disk has ruptured. Pressure gauges and pressure switches can be installed in these ports Connection - 1/2" NPT in, 1/2" NPTF out. 2 x 1/8" NPTF for gauge/pressure switch Disc burst pressure - 400 psi (27.6 bar)
Image
Web URL	http://westermeyerind.com/
Documents	638_westermeyer_product_catalogue UStamp