Accumulator - Westermeyer - 1-1/8" ODS - 31 Bar




 Product Code  A6-11
 Description  Accumulator - Westermeyer - 1-1/8" ODS - 31 Bar
 Unit  Each
 Notes Suction line accumulators are designed to act as a temporary holding vessel between the
outlet of the evaporator and the inlet of the compressor. During flood back conditions,
the accumulator traps the liquid charge and allows it to be evaporated and fed to the
compressor at a controlled rate. The internal U-tube includes an orifice, which ensures
proper metering of the oil back to the compressor.

The accumulator should not be sized for less than 50% of the total system charge. Size
the accumulator for minimum pressure drop. Accumulator capacities below are rated at a
1 psig drop, which facilitates proper oil return. The minimum capacity is the lowest
amount that will ensure proper oil return.

Welded and brazed design for higher strength, Nitrogen tested for cleanliness, Nickel
plated connections, Screened orifice for proper oil return, Powder paint finish

Connections - 1-1/8" ODS

Maximum working pressure - 450 PSI (31 bar)

Dimensions - 152mm Diameter x 476mm H
 Image Image
 Web URL http://westermeyerind.com/
 Documents
© Copyright 2016 Cooling Equipment Ltd. All rights reserved. Site by Spire.