Vibration absorber - 1-3/8"ODS - 34 Bar

Product Code	VAF-10
Description	Vibration absorber - 1-3/8"ODS - 34 Bar
Unit	Each
Notes	Packless vibration absorbers function best when installed as close to the compressor as possible, and perpendicular to the major vibration direction as shown to the right. For optimum absorption of a vibration, the refrigerant line should be anchored at the end VAF/VAFS furthest from the vibration source. Install Packless vibration absorbers horizontally wherever possible. Care should be taken to allow sufficient space for the vibration absorbers so that it will not be subject to static compression or tension after soldering in place. Units should be installed in a straight line; they are not intended to compensate for offset piping. Although high temperature brazing alloys (having a melting point of 1625ºF) are used to braze the joint on the VAF models, care should be exercised when making the sweat connection. The torch flame should be directed away from the braid. Clean excess flux from the unit to prevent possible corrosion and premature failures. Connections - 1-3/8" ODS Maximum working pressure - 37 bar Burst pressure - 186 bar
Image
Web URL	http://www.packless.com/catalog/ItemListView.aspx?id=30
Documents	Specifications vibration-absorbers-installation